ISP_1212U_V1401.EXE

"This driver works for my machine...."

"The Snapshot suddenly stopped working with the previous driver but is working sweetly with this new one."

"The driver did not work, it installs Scanwise 2.00 perfectly, but when trying to use Scanwise, the computer does show the introduction page of Scanwise, but does not recognise the scanner and gives a message:"Please turn on your scanner".

I us the dutch version of snapscan

Thus the driver is at the moment useless for me.

Do you have a solution?

Sincerely

Ludo Joly"

"don´t work. old driver for W9x work good."

"will not work with win xp"

"Just another wast of time the softwre installed but still could not find the .inf file needed"

"Concur with those who say it doesn't work with XP: I get the report that the device is working in control panel, but when I attempt to use the scanner, it says the device has hardware problems."

"doesn`t work with xp"

"There are later versions available"

"Logra poder conectar mi scaner ,muchas gracias"

"Please help me!This driver doesn't work for me under win xp pro.can someone explain me step by step how to install it??can I keep my olders programs for this scanner?I'm hopeless!I tried to do like Andy or Fritz E but it still doesn't work and say that my scanner isn't connected.....many thanks to the one who wants to help me!"

"I see a lot of you have problems with these drivers (the first thing I have to tell you this driver work’s) that’s because you have no experience loading or installing hardware or the drivers. First what you do in this case is install the software then connect your scanner. Win Xp will find the new hardware and will ask you to install the drivers press next, win Xp automatically will find the appropriate driver in system 32 folder and you are done. It’s advisable to reboot your computer."

"I downloaded this driver for a snapscan 1212U running Windows 2000 Pro. This utility works better than the original USB driver and tools that came with the scanner! It installed easily, and once I rebooted, the utility came right up, and I was able to scan within minutes. One really nice feature is that the scan plugs the image right into different documents."

"Thanx a lot! At the homepage of agfa I couldn't find the driver, it's really impossible to find it, very bad design, not userfriendly. ( But now with this driver I am really happy! )"

"Thanks a lot to Fritz E - using "Add Hardware Wizard" it works fine!"

"Yes, smooth as butter, just install - then in configuration - new hardware (not printers & scanners), let the system detect the scanner and finished, thanks!"

"Did the trick....was real easy."

"do me a favour guys by sending me the win98 exe file for agfa snapscan 1212u usb scanner"

"this was just the ticket. got the "connect/turn on scanner" message at first but followed Fritz E's instructions and it worked fine. Cheers."

"many thanks my scanner works again. just remember to update driver.! thx jerry"

"J'espère que ça marche !! En attendant allez faire un tour sur www.manella.com"

"Finally! Self install goes nowhere on XP Home as recommended load the driver .inf and it's done... The driver helped but this message base did the trick..."

"Works fine as an administrator,snapscan won't work as a user"

"Works great, with a little bit of playing around. I've installed the driver, then I went to device menager > SNAPSCAN 1212U > update driver. I had to unzip (with WinRar) the downloaded program file to know where the driver is (its the agfascan.ini file)I had to install manually with the have disk option because all the other options didn't work. But now everythings fine. Thanks to Jerry K! X8Ð"

"used this for win 2000. once i figered out how to unpak it,after unzip, it works great. thanks."

"NIKEZ TOUS VOS MERE VOUS AVEZ DE LA CHANCE KE SA MARCHE BANDE DE FILS DE PUTE DE PIGEON AHAHAHAHAHHA"

"I downloaded the driver and it still asked me to turn on or connect. I had previously downloaded a new program called Scan Wise from the AGFA site. I had to go to Device manager and select this driver. Unplugged the scanner and usb, restarted computer, plugged in scanner and usb, reinstalled software and it all worked fine. I can use the Scanwise program in MS Picture it. It was a chase to make this work but the driver was the ticket. Thanks, Jim"

"Thank You very Much. Uninstalled earlier version which didn't worked in XP pro. Downloaded, Installed and Restarted the system. Boom there we go, everything worked OK. Thanks a lot. BJ Sweden."

"I just followed directeions and it worked. Thank you very much. I was about to give up."

"Génial! ça marche très bien avec XP Pro en suivant les conseils de Fritz E. Thanks a lot"

"Ik heb deze driver succesvol geinstalleerd in Windows XP hartelijk bedankt"

"Yes It's functionnel with XP Pro. Thank a lot )"

"With XP Pro, I tried three drivers and this one finally worked (actually, the others might have, had I used the hardware wizard before). After installing this exe file, you need to use the "Add Hardware Wizard." From the Control Panel, click Printers and Other Hardware, then "Add Hardware" (Attention this is NOT the process that follows the Scanners and Cameras icon, which asks you if you have the manufacturers disk). Once in the wizard, it will tell you that the driver is not installed. In the next pane or two, it will allow you to point to AGFASCAN.inf which is in the Windows/inf directory (assuming you launched this download). Finally, the scanner still didn't work (but the computer saw it) until after reboot (also turn on and off the scanner to clear it). I hope this is helpful."

"WOW THX guys i managed to make my scanner work!! I thought i was kaput and was ready to burn it!! ) THX!!"

"Thanks! It works with W2000pro I was looking for this driver since a long time... Soooo Good ! Pascal."

"Thanks !! it worked fine for me with my xp pro . at first i had problems with the "turn on or connect scanner" thing!! and the "AGFASCAN.INF" search didnt work either!!! But then i just updated the driver for the scanner and ta daaa!!! working!!! i`ll hope you can excuse my bad english =) (im from sweden) if you didnt understand how i get it to work,i can try again....its just so hard to know what all buttons and commands are called in english!=( Best regards/Kyle_Troy"

"I also stuck with the same problem as Lewis - XP Pro and error message saying like "...turn on or connect scanner..". I am going to give the AGFASCAN.INF a go..."

"If you have trouble with WinXP not finding your driver after installing, try searching your hard drive for AGFASCAN.INF. And then do an advanced install and pick that driver."

"I installed the driver and rebooted. I then had the Alan Lewis problem until... memory gets foggy here, but I am pretty sure that I had to tell the computer to use that dirver for that scanner. Either I used Device Manager and saw that these was no driver associated with the scanner or the computer just told me. Either way, I went through a kind of "driver install" procedure after I had already downloaded and (I thought) installed the driver."

"It works fine with XP home. Thank you."

"It doesn't work with XP Pro... -( Always the same problem."

"I can get this driver to work without problem on xp home edition..I have xp pro on another machine and it does not recognise the scanner..Tells me to switch on the scanner even though it is already on.."

"Did anyone figure out how to bypass Alan Lewis' problem? Please help with advice, we all could use it."

"I have the same problème, XP or 2000 or win ME don't recognize my scanner 1212U, alerting me to turn it on even it is already on .... what's the problème ?"

"Did not work. Same problem as Alan Lewis."

"This driver works correct in XP !! Installing, re-start and ok. Thank you."

"Unfortunately, even after installing this version, xp (Home edition ver. 2600) won't recognize my 1212U. Keeps alerting me to turn on or connect my scanner which is both turned on and connected."