S2501enx.exe

"Installed first time on WinXP SP2 - Works perfectly! Highly reccomended!"

"Works ok with XP pro."

"It wouldn't extract well for me :-("

"The driver has been stable and worked well with the scanner"

"I had to unzip to a temp folder (C:\Windows\temp) & plugged the scanner usb lead into the laptop & the scanner, then when windows picked up the device, I pointed the install driver wizard to the temp location of the files (C:\Windows/temp).

It's basic, not fancy - like the CanoScan Toolbox I had (Before I did the factory restore (After 1 year, my M735 1.70A GHz processor was feeling like a 486 SX25)- forgetting to back-up all my data first. Whoops!!! Apart from anything else, 6 years of committee work lost!).

I will try to get the toolbox back asap, from somewhere (Canon website?).

It may be basic, but at least it does work, & it has got me out of a fix, for now.

Recommended.

"

"easy to install an worked v/well"

"No setup.exe, but easy to install using the new hardware install routine. Just save the files to disk, then point to the directory when the driver install routine asks for a disk."

"Sorry, I did use it."

"hello ,

I lost my driver . So i want to download this driver ."

"didn't work - just some useless install files...."

"I found the answer. Go to http://consumer.usa.canon.com/ir/controller?act=DownloadSearchResultsAct&keyword=Canoscan+N67OU&Submit.x=39&Submit.y=2 and install the utility (toolbox) for your system. This gets you the program you need if you don't have the original installation disc. Use the setup.exe in the Disk 1 folder and ignore the other 3 folders. Then use this driver to bring it all together....at least it did in Win XP Home Ed. I'm doing this as a favor for a friend. Just remember...no good deed goes unpunished :-)"

"Might work as an 'update' but didn't work for me with Win XP Home Ed. No "Setup.exe" just files, files, files. Need original setup disc. Still searching........"

"Fantastic - I have been looking for this driver for ages and now i've got a website that does it all"

"Horray for this site top marks"

"Well chuffed, couldn't of asked for better."

"When I tried opening from zip it said file was damaged..had to download again..am trying again now."

"seems to work fine although, only tried it a couple of times so far"

"Even when i have already installed the driver, and just one scan succesfully done, it looks as working ok."

"i tried to install a scaner made by canon and i damaged my instalation disk, i though by using this procedure i could install my product. the instalation failed, please email me back to show me how to install corectly thank you!"

"Everything woorks if you read instructions :-)

All the best From Jan Mortensen

IP:80.166.133.83

Http://www.jm-data.dk"

"Just Unzip and go to my computer and right click go to properties hardware device manager point at your canon scanner and update driver and then point at the map on your desktop where your download are unzipped and point at N067U.inf and say update. This is the trick -)) Regards Jan"

"did not work for me"

"I was unable to use perhaps it was me"

"From New IP Adress

http://80.166.133.83

Thank you all girls and guys

for your time and trouble to make this driver woorking at home

All the best from.

Jan Mortensen

Denmark."

"Easy to Install - Self extract is a treat. Brilliant. Just what i was looking for."

"Blessed Love!! The ting work wicked."

"Lucky 80.244.88.254 Works great on WinXP Proff! -Thanks Mon Nov 24 23 45 34 EDT 2003"

"Downloaded the file, unzipped into windows/temp and followed Jan Mortensen's notes. Worked a treat. Thanks"

"It didn't work for me. I have been strugling with this scanner for hours now. When I try to insall it ask for the scann diskette! I put the CD but it doesnt find the files it is searching for...I am tired, I dont know what to do."

"I can't get this thing to work, can someone please help????????????"

"Just Unzip and go to my computer and right click go to properties hardware device manager point at your canon scanner and update driver and then point at the map on your desktop where your download are unzipped and point at N067U.inf and say update. This is the trick -)) Regards Jan"

"i unzipped the file but it didn't run/install....i don't understand...help?"

"You know, some people are so ungrateful. Me? I'd like to say thanks for taking the time and trouble to make this driver available, for free. Cheers"

"good stuff jan! did the trick when my friend needed it."

"finally got it workin after a very long labour. maybe im jst v inexperience (im 15), bt i had to figure out how to work the drivers."

"To Lew and Marlene Marc Tamica hope you will understand I post the read mee file. ScanGear CS-U for Windows 6.2.3 ---------------------------------------------------------------- April, 2002 Copyright (C) 2002 Canon Inc. o Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and in other countries. o IBM and IBM PC/AT are registered trademarks of International Business Machines Corporation. o Other company and product names may be trademarks and/or registered trademarks in their respective countries. 1. ScanGear CS-U 6.2 Features ScanGear CS-U for Windows 6.2 (hereafter referred to as "ScanGear CS-U") is a 32-bit TWAIN-compliant scanner driver for Canon CanoScan N670U/N676U/N1240U scanners. When this driver is selected from within a TWAIN-compliant application program, one of these scanners can be used to scan image data. 2. What You Need Required Hardware o CanoScan N670U/N676U/N1240U scanner. o USB port (Universal Serial Bus Specification Version 1.1 compliant) o Pentium CPU or higher. (For Windows 2000 Professional, a Pentium 133 MHz or higher is recommended.) o 64 MB RAM (128 MB or more is recommended) Required Software o Microsoft Windows 98, Windows Millennium , 2000 Professional or XP o TWAIN-compliant application programs 3. A General Tip on Usage o Only run one application at a time that is actively linked to ScanGear CS-U. Do not open more than one application that is actively linked to ScanGear CS-U. Also, do not open ScanGear CS-U more than once to acquire an image in the same application. o If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image, and will return an error. o With Windows 2000 / XP, the TWAIN data source may not open correctly from time to time when the system file is in the NTFS format. For security reasons, the TWAIN module cannot be written to the “winnt" directory. For details, contact your system administrator. o Some application programs may hide the TWAIN user interface. In this case, refer to the application program’s manual to find out the required setting changes to show the TWAIN user interface. o Always close the ScanGear CS-U main window before you exit the parent application program. o With Windows 2000 / XP, the system administrator is required to install or uninstall ScanGear CS-U. o Certain personal computers (including laptops) may not restart correctly from standby mode when the scanner is attached. If this occurs, please reboot the computer. o The scanner button may not operate after you install the driver. In this case, restart the system. o When you preview or scan an image with a relatively uniform background, the Auto Tone function may change its coloring. If this occurs, reset the Auto Tone. o With Windows Me, the scanner may not be detected after the USB cable has been disconnected and reconnected. If this occurs, please reboot the computer. o Some applications may close ScanGear CS-U automatically after scanning. 4. Running ScanGear CS-U with Specific Applications o If more than one scanner exists on the system when using Caere PageKeeper or Caere OmniPage Pro, set the scanner being used as the default scanner in the Caere Scan Manager in the Control Panel. o Images after the first image may not be passed on to the linked application when the Multi Photo Scan function is used with Microsoft Word 2000, Excel 2000 or PowerPoint 2000. ---------------------------------------------------------------- End of File ----------------------------------------------------------------"

"No, It didn't work. I would like to uninstall it. How do I do that? Thanks, M.K."

"sorry folks i posted the wrong coments this is for the scsicard driver hpt3xx scsi card"

"Unzip to a folder fks HPT just right click on hpt3xx.inf and a box will come up then use install. Thats all Jan Mortensen Danmark"

"What directory should I unzip the files to? I'm using Win XP Home, but just unzipping them to C \WINDOWS\TEMP didn't do anything. What did you guys that also use XP do to get it to work?"

"I downloaded this driver and nothing happened. What else was I supposed to do?"

"I just download, run in my PC and BINGO! Thanks, it works perfectly, easier than the CD enclosed with the product."

"Works great on WinXP! -Thanks"

"so it'll work on winXP too...thanx!"

"the driver is working well thank you"

"it would be better if u made it esier 2 find lov the site"

"Dont know and I will not be back to say unless I come back here again."

"Why is the Canon site always down? Glad I found this site."

"Hope it works for Windows 98."

"Glad i found it after a long and long search"

"Magnificent. Worked perfectly on Windows XP, installation smooth & easy Thanks!"

"You are the MAN! Worked fine on Win XP Home."

"I'm Not Sure If It Will Work On Windows ME"

"worked on windows 98"